Couple single valve collector

collector valve

The collector valve is made of quality brass with an internal thread according to the standard and is designed for residential and commercial piping exposed inside or outside the building.

These types of valves have two O-rings in their path. With the difference that there is a metal washer on the pipe so that when the pipe is connected to the valve, this metal washer is placed behind the pipe and inside the nut and is fixed to the desired location. In this way, this washer no longer allows the nut to be released.
Note that first the nut and then the metal washer must be placed inside the pipe, and then the pipe must be inserted into the pipe joint to be able to install the washer and nut.
Collector valves are usually available in the market in sizes 16 and 20, which means that for building piping, you can use hot and cold water piping or building heating piping with 16 or 20 and 25 pipes or a combination of these two. do it Of course, using the 16 tube is a more common method due to its lower thickness and higher pressure.