Vertical polyethylene water tanks

Bista Bespar polyethylene tanks

Bista Bespar polyethylene tanks are produced from very high quality materials with high thickness and weight in several types of single layer, three layer and four layer, as well as in various designs, the inner layer of the tank is in two colors, white and blue.

Important points when installing Bista Bespar tanks

– It is recommended to use single-layer tanks to store drinking water in a completely covered space.

– It is recommended to use three-layer tanks to store drinking water outdoors in temperate regions.

– It is recommended to use 4-layer tanks to store drinking water in the open air in tropical and cold regions and more for medicinal purposes.

– When the tanks need to be filled and emptied daily, it is recommended to use vertical tanks.

Bista Bespar polyethylene tank advantages

– Compared to metal tankers, polyethylene tanks have much less weight.

– Due to its high resistance to heat and cold, it can be used in all geographical areas.

– Polyethylene tanks are the only suitable option for wet areas due to non-corrosion.

– Due to their anti-corrosion properties, they are the best option for storing acids.

– It is possible to produce in the size, size and thickness desired by customers according to the order.

– The built-in grooves on the body make the tanks stronger.

– Tanks are integrated and seamless.

Important points when buying Bista Bespar storage tanks

– When transporting and unloading with vehicles, avoid dropping and rolling tanks on the ground separately.

– When transporting with vehicles, secure the tanks with a rope.

Important points when installing Bista Bespar tanks

– Tightening the connections too much will damage the tanks.

– If you connect the outlet of the tank to the pump, use a shock absorber to prevent the transmission of vibrations caused by the vibration of the pump to the tank.

– In order to prevent excess or lack of pressure inside the tanks, it is necessary to install an overflow with a diameter at least twice the size of the inlet pipe.

– Avoid hitting sharp objects and applying concentrated load to the tanks.

– Avoid rolling the tanks on which the fittings are installed.

– Any chemical treatment including diluting acids and bases with water or placing water vapor inside the tanks is not allowed.

– If you use the city water network to fill the tanks, use a mechanical floater in the water inlet and make sure that it is working properly by visiting periodically.